High quality 6063 T6 aluminium pipes (Hose Joiner)
Ideal for joining hoses for Intercoolers, Radiatrors, Air induction, Superchargers, or for making any D.I.Y system.

Viper Performance Aluminium Hose Joiners are designed to fit perfectly with any universal silicone hose.
- Mandrel bend,
- Mirror polished, (no coating for welding),
- Roll beaded ends for best hose retention,
- Seamless tubing,
- Wall thickness 1.6 to 2.0mm,
- Tightest bend radius on market
(most bends are 1.2D),
- Bends have 152x 152mm legs
- Clean finish ready to use,
- Protected with bubble wrap,

BESPOKE PIPES:

We also offer a bespoke or OEM manufacturing service, for induction, intercooler pipes, Coolant etc..We can fabricate aluminium pipes from sample or drawing with brackets, MAF sensors, breathers, Boses etc... as well as offer several surface finishes such as Polished, Natural, Brushed, Powder coated or painted.

To see our work simply visit us at our next show, or we can show you examples in our show room.

Bespoke pipes are subject to minimum orders.
We do not offer one offs, but can recomend fabricators for this.
ALL PIPES & JOINERS are EXTERNAL DIAMETER and match the I.D of any silicone hoses

30,000 Silicone Hoses in stock for immediate dispatch !

Choose your shape required from our large range of UNIVERSAL RACE PARTS
With BLUE, RED, and BLACK hoses in stock today.
We also produce the largest range of colours made to order (minimum order applies) check our colour section for info.

Choice of:
- Polyester reinforcements 170°C
- Nomex reinforcements 220°C
- Glass reinforcements 280°C,
and FLUOROSILICONE liners for oil

ANY SHAPE, ANY SIZE !

Need something longer, shorter, bigger, smaller etc.. We can help !
From a simple one off bespoke hose to large 100,000 unit order.
Call our helpful and knowledgeable technical sales dept, to discuss your needs.

You will also find most of your questions answered and valuable information on the "bespoke" section in the home page.

Viper Performance Silicone replacement hoses will make a huge difference in quality & reliablity, In fact we guarantee our hoses for 3 years !

Our silicone hose kits are designed to improve air flow and will not suck-in under boost, or balloon under pressure.

With a superior build quality, these hoses look great, and cost effective against manufacturers rubber hoses and come in a choice of colour.

Standard Original Equipment hoses are almost always made of EPDM rubber which perishes, and has limited performance once a car is modified or unsuitable and unreliable for fast road, race and rally use.

Hot turbos and hot engine bays will damage standard hoses over time.

If you are racing or serious about your performance, why risk being out of the race for something as silly as a burst or perished hose ?.

Currently we only produce kits for manufacturers listed on the right -->
we are very interested in developing kits for other cars in the future
We want to hear from you if you are interested in specific kits not listed here.
Contact our technical sales team today
to discuss your requirements.

NBR rubber lined Steel Braided hoses are specially designed for use with Oil and suitable for all grades of Fuel including race fuel.

As an alternative to Silicone Hoses we supply Quality Stainless Steel Braided hoses for high temperatures, and high pressures.

Or NBR (Nitrile Rubber) inner lined hoses work well for fuel lines, carburettor, breathers, Oil coolers etc..
We also provide PTFE lined hoses suitable for brake lines, clutch, fuel etc..

With a good range of standard fit swivel end hose fittings anodised in Blue / Red and BLACK you have everything you need on this site to do your water / air / oil / fuel connections.

Sold by the half meter, this product is competitively priced and affordable.