Our vacuum tubing is now available in Extra Value convenient kit packs. These packs include 3,4,5 and 8mm ID tubing perfect for a variety of applications. We include cable ties and nylon tube connectors in the packs
Applications:
• Vacuum lines
• Brake servo
• Breathers
• Boost controllers
• Dump valves
• Windscreen wipers
As well as our silicone elbows and 1-2 meter long hoses we also offer a 4 meter long straight lengths. Offering 4 meter lengths eradicates the need to buy four separate lengths and join and clamp them together. Any join creates a potential area for leaks and therefore one single piece will provide you with a quality leak free connection.
These continuous 4 meter lengths are available in selected sizes from 8mm up to 32mm diameter (please visit the website to check sizes available).
They are ideal for water, breathers, air connections without making a join. The length also makes them ideal for non automotive applications.
Available from 3 to 5 ply with a reinforced construction these straight hoses offer excellent build quality with an inner liner. Thanks to our quality material, and fabrics, our small diameter lengths are very flexible and achieve a very good bend radius.
To find out more and buy your 4 meter hose click here.
When carrying out work on your vehicle, it can sometimes be difficult to achieve the desired result when you’re restricted to rigid angled hoses. This is why we offer super flexible silicone hoses. These are particularly useful for coolant and bottom radiator connections, which can be tricky to access.
These hoses can bend to almost any shape, giving you ultimate flexibility. In addition to their flexibility, these hoses can also withstand higher pressures thanks to the steel wire spiral that is embedded into the reinforcement piles.
Available in blue, red an black, these hoses can give a striking appearance. We recommend using T Bolt clamps with our hoses, which you can also purchase from ourselves.
In some applications, a pre-moulded elbow hoses cannot give the necessary angles needed for a tidy and efficient engine bay. This is why Viper Performance offers flexible cuffed coolant hoses, which give an excellent bend radius, thanks to the wire helix embedded into the wall of the hose. These work fantastically to connect your coolant or water hoses.
The hoses are specifically designed with a 50mm non-wired section at either end of the hose so that they are easy to connect and clamp. The hoses do not remember their shape, so they may need to be supported in some situations.
For more information on our flexible cuffed hoses, please click here. Alternatively, please give us a call and we will be happy to talk through your requirements with you to make the best recommendation.
The last thing you want to happen to your engine bay is for a hose to crack. However, this can happen if the correct hose is not specified. For areas of heavy vibration or where engine movement may be severe, you need a heavy duty hose that can handle the extra pressure.
We offer a turbo loader hump hose which has two convolutions, specifically designed to not stress or split under heavy engine vibration. The twin humps work a mini bellow. This gives the hose vibration absorption once fitted.
We particularly recommend these hose for areas such as connecting charge coolers/intercoolers where vibration and movement can be particularly high. They are specially manufactured with NOMEX, making them extremely resistant to high temperatures.
When upgrading your engine bay or fuel system, it can be difficult to know exactly what type of hose you need. With so many hoses on the market, you may run into problems selecting the correct material hose for your desired application. This piece is designed to help you understand the difference between PTFE and Nitrile rubber hoses, so that you can choose the correct one for you.
As with everything, PTFE and Nitrile rubber hoses both have their advantages and disadvantages. Understanding them is important, as it could make a big difference to your fuel system.
Nitrile rubber braided hoses offer great resistance to oil and fuel. The flexible rubber means that nitrile rubber hoses offer an excellent bend radius. This means that you can create the desired system without the need for extra fittings and angles. The hoses can be bent and fixed as needed, resulting in a sleek and tidy fuel system.
However, nitrile rubber hoses should never be run inside the cabin as fuel fumes can permeate through the wall of the hose. They should only be run in areas such as underneath the car, or under the hood.
For hoses that need to be run inside the cabin, PTFE hoses are ideal, as fuel fumes will not permeate the hose walls. However, as PTFE hoses have a significantly reduced bend radius, more angle and end fittings may be required, which increases the chance of a leak occurring in the system. While PTFE hoses are generally cheaper, the savings are often spent on the extra fittings that are required. An additional benefit however is that PTFE hoses are lightweight, so if weight is a concern, PTFE hoses might be the ideal solution for your fuel line.
For more information about our PTFE or nitrile hoses, you can visit our main website. Alternatively, you can get in touch and we would be happy to talk through your requirements with you.
Designed to perfectly fit with any universal silicone hose, our aluminum hose joiners are perfect for a wide range of applications. We recommend this high quality product for intercoolers, radiators, air induction systems, superchargers, and intercooler systems or for creating a D.I.Y system. As they are mirror polished, these joiners will look perfect in your engine bay. Offering the tightest bend radius on the market, you will have the flexibility to create the perfect system for you.
We currently have large amounts of stock available for our 45o and 90o elbow hose joiners. These joiners are roll beaded, ready for use. If you cut the pipes, we can re-bead them for just £2.50.
For more information about our aluminium hose joiners, please visit our product page.
Our lightweight and super flexible neoprene ducting hoses are ideal for multiple applications. We recommend this products for air intake, induction, and cone air filters, as well as hot and cold air extraction, exhaust gas, dust extraction and heater hoses.
We have a range of neopreneair ducting available, depending on the temperature that the ducting needs to withstand. All of our ducting has a bronze plated steel wire spiral, which gives the ducting a tight bend radius and flexibility.
AVAILABLE PRODUCTS
Our stainless steel braided hoses are the perfect solution for oil, fuel, carburettor, water and vacuum lines. The excellent bend radius means you can create the ideal lines for you. These hoses are double braided, meaning they are capable of withstanding high pressures.
Here at Viper Performance, we put quality at the heart of everything we do. This means that every single product in our range is of superior quality and is made to last.
We supply our stainless steel braided hoses in multiples of 1 metre, so when purchasing please enter the number of meters you require in the quantity selection (e.g for 3 meters, enter QTY 3).
SPECIFICATIONS
Here at Viper Performance, we know how difficult in can be to connect your own fittings and hoses. It can be a very labour intensive job that takes up a great deal of time. This is why, in addition to our steel braided hoses, we also supply the perfect fitting tool for them.
The installation kit can either be bench mounted or portable, making this the perfect piece of equipment to take on the road with you. The machine will crimp AN style hoses with ease, making it a much quicker job.
This hig
h quality product is made of solid billet aluminium, meaning you can rely it to last for years to come. The kit is supplied in a carry case for protection and ease of transportation. With a range of sizes available, this kit will allow you create your oil and fuel lines quickly and safely. The range of JIGS allows you to assemble hose ends DASH-4 to DASH-12, as well as doubling up as a vice!
This really is the perfect equipment for a garage, workshop, race team or car builder. Professionals can rely on this equipment to last for years to come, making their job significantly easier.
You can watch our demonstration video here for more information.